WEEK 5 (FYP 2)

TITTLE : IRON PROCESS

On this week, I continue doing a stick the design with the PCB board with iron. After the design has been printed on a glossy paper cut the excess paper and place it face-down on the PCB with the ink touching the copper plate. The  ironing process must on wood with a layer of newspaper and bond paper. Also the iron  must at MAX before ironing it.

 Figure 1 : Cooper plate

Figure 2 : Schematic Design on OHP paper (Tracing Paper)

Figure 3 : A Clear Schematic Design

Figure 4 : Iron Process

copyright by

sh mohd faiz

WEEK 4 (FYP 2)

TITTLE :  PRINT THE LAYOUT ON OHP PAPER

The figure 1 below is the picture of the OHP paper and cooper board before it will be print the schematic design on the OHP paper using a laser printer or laser copier. This is the process before we can start  transfer the image to the OHP paper using Iron and start the etching process. Figure 2 is the Layout of the  Automatic Accident Alert that have to print on the OHP Paper.

Figure 1 : Show the OHP paper and the cooper board

Figure : Layout of the OHP paper

copyright by

sh mohd faiz